Even though SSDs are becoming increasingly popular, HDDs are still indispensable. As data graves they take up our huge amounts of data, which accumulate nowadays. But more and more often they are not installed in our PCs, but in NAS servers. These have become affordable in the consumer sector in recent years and allow access to their own files from any device in the network, sometimes even mobile via the Internet. In order for access to be possible throughout, the hard disks must meet certain requirements. Otherwise the fun is only of short duration. With the N300 NAS-HDD, Toshiba offers exactly such a model, especially for use in NAS servers. The N300 series is available with 4, 6 or 8 TB. We have the Toshiba N300 NAS-HDD with 6 TB in our test.
It should be noted that the NAS-HDD is only conditionally suitable for use in PCs. It is approved for continuous operation and can be used for everything. However, it is relatively loud, louder than conventional 7,200 rpm hard disks. In addition it has a strong heat development, which does not become however by the intelligent temperature control a problem. However, good ventilation of the NAS enclosure is advantageous to prevent automatic shutdown to protect the NAS-HDD.
|Model||Toshiba N300 6 TB|
|Storage capacity nominally||6000 GB|
|Interface||S-ATA 6 Gbit/s|
|Spindle speed||7200 rpm|
|Form factor||3.5 inch|
|work load||180 TB / year|
|Noise emission||33 dB(a) Idle / 35 dB(a) Load|
|Dimensions||26 x 147 x 101.6 mm|
|Special features||Vibration sensors |
suitable for continuous operation
If you click on the respective benchmarks, they will open in a larger view.
HD Tune Pro 5.50
ATTO Disk Benchmark (write)
ATTO Disk Benchmark (read)